|
General überholte Maschine, in Ausführung
nach CE-Norm
Spitzenhöhe : 185 mm
Spitzenweite 500mm, 750mm, 1000mm oder 1500mm
TECHNISCHEN EINZELHEITEN
Spitzenhöhe : 185 mm
Spitzenweite 500 mm, 750mm, 1000mm oder 1500mm
Über Bett und Längsschlitten : 370 mm
Über Planschlitten : 230 mm
SPINDELSTOCK
Spindelbohrung : 35 mm
Kegel der Hauptspindel : MK 5
Kegel der spitze : MK 3
Anzahl Spindeldrehzahlen : 16
VORSCHUBKASTEN
27 metrische Gewinde : von 0,25 bis 10 mm
54 Withworth Gewinde :von 96 bis 1 5/8 g/”
54 Längsvorschübe :von 0,05 bis 2,8 mm
54 Planvorschübe von 0,025 bis 1,4 mm
SCHLITTEN
Verstellung Längsschlitten : 700 mm
Verstellung Planschlitten : 235 mm
Verstellung Werkzeugschlitten : 120 mm
Werkzeugschlitten drehbar : von +45° bis –45°
REITSTOCK
Pinole seitlich verstellbar : 10 mm
Pinolendurchmesser : 48 mm
Verstellung in Längsrichtung : 110 mm
Konus der Spitze : MK 3
AUSFÜHRUNG :
- Hauptspindel mit LO-Aufnahme
- 16 Spindeldrehzahlen von 38 bis 1600 U/min
- Elektrische Ausrüstung mit 2-tourigem Motor 3/2 Ps, 380V,
3-fasig, 50HZ, mit Polumschalter am Schlosskasten und
- * thermogeschützten Hauptmotor
- * Unterspannungsauslöser
- * NOT/AUS-Taste
- abschliessbaremHauptschalter
- Leitspindelsteigung 6 mm
- verlängerter Planschlitten
- chromierte Hebel und Teilringe
- Spänewanne
- Teilring zur Verstellung der Reitstockpinole
- Teilring zur Verstellung des Längsschlittens
- Körnerspitze MK 3 mit Reduzierhülse
- Hauptspindelbohrung 35 mm
- Satz Bedienungsschlüssel
- Bedienungsanleitung
ZUBEHÖR :
- Universal 3-Backenfutter 200 mm Durchmesser zum
aufflanschen, Fabrikat RÖHM
- Schnellwechselstahlhalter RAPID ORIGINAL
- hinteres Schutzblech über die Gesamtlänge der maschine
- Späneschutzschirm mit Mikroschalter auf das hintere Schutzblech
- Sicherheitsmikroschalter auf dem Deckel des
Wechselräderkastens
- Mitlaufende Körnerspitze MK 3
- feststehende Lünette
- mitlaufende Lünette
- Kuehlmitteleinrichtung mit Pumpe
|
Completely refurbished machine, according to CE-regulations
Height of centres 185 mm
Distance between centres 500mm, 750mm, 1000mm or 1500 mm
TECHNICAL SPECIFICATIONS :
Height of centres 183 mm
Distance between centres 500mm, 750mm, 1000mm or 1500mm
Width of the bed 254 mm
16 spindle speeds from 24 to 1000 rpm
2-speed motor power 4/2.8 HP
Swing diameters
Swing over bed and saddle 360 mm
Swing over cross slide 200 mm
Headstock
Spindle bore 35 mm
Center morse taper MT 5
Spindle nose Long taper key drive size L-O
Feeds and threading
54 longitudinal feeds from 0,05 to 2,8 mm
54 cross feeds from 0,025 to 1,4 mm
49 metric threads from 0,225 to 10 mm
54 withworth threads from 96 to 1 5/8 g/ »
42 module threads from 0,225 to 5 mod
54 pitch threads from 192 to 3 ¼ pitch
Saddle and Slides
Saddle travel 715 mm
Travel of the cross slide 235 mm
Travel of the toolslide 120 mm
Swivel angle of tool slide from +90° to -90°
Tailstock
Disaxing each side of spindle centre 10 mm
Diametre of barrel 48 mm
Max. travel of barrel 110 mm
Centre morse taper MT 3
MACHINE EXECUTION
- Headspindle with spindle nose LO
- 16 spindle speeds from 38 to 1600 r.p.m.
- Electrical equiment with 2-speeds motor 4/3 HP, 400V, 3-
phase, 50Hz, with inversion switch activated by lever and
with
* thermoprotection for the main motor
* no-volt relais
* emergency stop button
* lockable main switch
- leadscrew with step of 6 mm
- extended and grooved cross slide
- chrome plated levers and dials
- chip tray
- graduated dial for the control of the operations of the
tailstock
- dial of handwheel allowing to control the longitudinal
saddle movement
- 2 centres MT3 with reduction sleeve
- spindle bore 35 mm
- set of service spanners
- operator’s and maintenance manual
EQUIPMENT :
- universal 3-jaws chuck, diameter 200 mm, make RÖHM
- quick change toolpost, make RAPID ORIGINAL
- rear metal guard
- protection screen with micro-switch on the rear metal
guard
- Micro-switch on the cover of the gearbox
- ball bearing live centre MT3
- steady rest
- travelling steady
- complete coolant attachment with electro-pump
|