|
Umlaufdurchmesser über dem Bett : 600
mm
Umlaufdurchmesser über dem Planschlitten: 475 mm
Drehlänge : 1000 mm
Spindelbohrung : 90 mm
Gleichstrom - Antriebsleistung : 22,5 KW
Stufenlose Drehzahlen : 45-2500 U/min
Gesamtleistungsbedarf : 45 KW
AUSFÜHRUNG :
a) MASCHINE
- Kompakte Konstruktion
- Sockel aus hochqualifiziertem, armierten Beton
- Schrägbett mit eingelegten, gehärteten und geschliffenen
Stahlführungen (+/- 60 RC)
- Hauptspindel A2-8" (AFNOR - E 62.109) = 8 DIN 55026, FormA
- Reitstock mit Schleppvorrichtung.
Hydraulische Pinole :
Hub 150 mm für die mitlaufende Körnerspitze MK 5 mit 2-
fachem Fusspedal zu bedienen
- Individuelle Schmierung der Führungsflächen von Längs-
und Planschlitten sowie dem Reitstock durch ein zentrales
Schmiersystem mit Frequenzmodulation durch die Steuerung
- Eingebaute Kühlwasser-Hochdruckanlage
- Kugelumlaufspindeln in X- und Z-Achse mit vorgespannten
Muttern
- Elektro-Revolverkopf, bi-direktional, mit 8 Positionen
für direkte Aufnahme von Standard Stahlhalter : 25 x 25 x
150 mm für Aussenbearbeitung
- Schutztür mit schlagfester Einglasung
- Eingebaute Maschinenbeleuchtung
- Hilfsschlitten mit Schleppvorrichtung
- Elektrische Ausrüstung 380V, gemäss den gesetzlichen
Sicherheitsvorschriften, Sowie KW- und Ampèremeter
- Bedienungs-, Wartungs- und Programmieranleitung
b) STEUERUNG FANUC
1. ALLGEMEINE KENNZEICHEN
- 2 simultan bahngesteuerte Achsen
- Lineare und zirkulare Interpolation
- Absolut- und Kettenmassen Programmierung
- Programmierung von Vorschüben in mm/Min. und mm/Umdr.
- Konstante Schnittgeschwindigkeit und feste
Drehzahlprogrammierung
- Schneideradiuskompensation
- Menue-Programmierung mit Software Drucktasten
- Feste Bearbeitungszyklen mit Schnittaufteilung
- Wiederholungszyklen
- Metrisch Gg/Zoll Umrechnung
- Handräder für manuelle Bewegung der Schlitten
- Handbedienteil zur Wahl der Bedienung -und Arbeitsweise
der Maschine und Korrektur der programmierten Vorschübe
und Drehzahlen
- Serielle Interface RS 232 C (I/O-Schnittstelle)
2. SPEZIFISCHE KENNZEICHEN FANUC 10 TF
- Grafischer Bildschirm 14" in Farbe (Werkstück -
Werkzeugbahn - …)
- Möglichkeit zur ISO-Programmierung neber der symbolischen
Dialogprogrammierung FAPT mit technologischer und
geometrischer Unterstützung
- Speicher : 64 KB Programmierspeicher (FAPT)
16 KB Programmspeicher (NC)
- Speichermöglichkeiten für : 17 Materialsorten
200 Werkzeuge
- Werkzeugkorrekturen : 32 Paar
- Möglichkeit zum Programmieren während die Maschine läuft
Sonderausführungen der Maschine :
01. Automatischer Späneförderer
|
Turning diameter above bed : 600
mm
Turning diameter above cross slide : 475 mm
Turning length : 1000 mm
Spindle bore : 90 mm
Power : 22,5 KW
Spindle speeds : 45-2500 r.p.m.
Installed power : 45 kW
STANDARD EXECUTION :
a) MACHINE
- compact construction
- base in special armed concrete
- casted bed with invested hardened steel guideways (+/- 60
RC)
- spindle nose A2-8" (AFNOR - E 62.109) =8 DIN 55026, Form A
- tailstock movement by locking at the saddle. Hydraulic
barrel stroke 125 mm, operated with double foot pedal
- individual lubrication system for the guideways of
saddle, cross slide and tailstock by centralised system
with frequenz modulation through the CNC
- high pressure coolant equipment
- ball screws with preloaded nuts for the X- and Z-axis
- automatic bi-directional indexing turret with 12 tool
stations for direct clamping of standard tools 25 x 25 x
150 mm for external machining. For internal work 3
toolholders Ø 40 and 1 toolholder 25 x 25 mm on 90° for
frontal work are included. For extra or special
toolholders : see "Accessories".
- protection door with safety glas
- incorporated lighting equipment
- auxiliary slide movable by locking at the saddle
- electrical equipment 380V, according safety regulations
including KW- and amperemeter
- Machine painted 2 tints grey-red (RAL 3011/7030)
- programmation-, operation- and maintenance manual
b) FANUC CONTROL
1. GENERAL CHARACTERISTICS
- 2 axis simultaniously controlled
- linear and circular interpolation
- absolute and incremental programming
- minimum programmable increment : 0,001 mm
- programming of feeds in mm/min. and mm/r.
- constant surface speed control and constant spindle speed
- tool nose radius compensation
- menu-programming with software push buttons
- canned cycles
- multiple repetitive cycles
- metric/inch conversion
- handwheels for manual movements of the slides
- operator's panel for selection of working mode of the
machine and adaptation of the programmed feed and speed
- I/O interface RS 232 C
2. SPECIFIC CHARACTERISTICS FANUC 1O TF
- graphical display in colour 14" (component - toolpath - …)
- possibility of ISO- programming and the symbolic FAPT-
language with technological and geometrical assistance
- program memory : 64 kB programming memory (FAPT)
16 kB program-storage memory (NC)
- storage possibility for : 17 kinds of materials
200 tool specifications
- tool offset : 32 pairs
- programmation while the machine is turning
Special executions of the machine :
01. Automatic chip conveyer
|