Manufacturer KOBE STEEL, yom 1978

Cogging strokes per minute range 80 – 120

Rated forge tonnage 4,000.0 m tons

Ram stroke 2,100.0 mm

Max daylight 4,600.0 mm

Table dimensions: front-to-back 5,000.0 mm - left-to-right 2,350 mm

table travel (either front or back) 5,250.0 mm

Column dims (square) 480.0 mm ea side

Opening between the column shields front-to-back 2,750.0 mm - left-to-right 1,450.0 mm

Distance between the columns front-to-back 3,020.0 mm - left-to-right 1,690.0 mm

Column center to center distance front-to-back 3,500.0 mm - left-to-right 2,750.0 mm

Return cylinder diameters internal 280.0 mm - external 507.0 mm

Sliding tool manipulator dims tool slide cylinder stroke 2,500.0 mm

tool manipulator width 2,120.0 mm

length of tool changer 9,250.0 mm

Approx press dimensions total length of press top to bottom 12,756.0 mm

floor level to topmost portion of press 7,038.0 mm

floor level to bottom of pit 10,000.0 mm

press length with moving table platform 20,900.0 mm

press width w/sliding tool manipulator 11,500.0 mm

System hydraulic pressure 315.0 Bar

7 pc. hydraulic pump power rating 350.0 kW together

Total hydraulic pumps power 2,450.0 kW

Line weights as follows press with moving table 520 tons - oil hydraulic system 140 tons

piping 46 tons - electrical system 18 tons - total line weight 724,2 tons

Equipped with: • Extensive documentation

• Three (3) cylinders – provides well balanced force when forging

• Four (4) square columns - provides precise stability • Pull-Down type action

• Complete Hydraulic system with (7) 350kW pumps • Complete electrical system

• Complete Electronic system • Operator's control Room

• Sliding table for moving forgings (front to back) • Sliding tool manipulator for tool changing (Left to right)

Note: During the dismantling process it was found that a number of parts required

replacing. Our offer includes providing these parts (NEW). A list is as follows:

1. Lower Cross Slide w/two kicker brackets. 2. Two of the three main rams.

3. Four tie-rod nuts.

Dismantling of this press was completed in September 2008.